Monday, July 27, 2020
Tool Shed
The siding on the tool shed is hung and painted. We have a few spots we need to go back and touch up, but overall it turned out extremely well. All that is left now is to paint the door blue to match the gable end and put on the roof. We still need to decide what kind of roof to do on the cabin, so we may just throw something cheap on the shed until we decide.
Sunday, July 12, 2020
Tool Shed
The trim has all been caulked and painted, the windows have been installed and the edges of the roof have been trimmed to length. We went to town last night to pick up the siding and it is in the trailer. We have decided to play for the rest of the day so we will start hanging it when we come back up next weekend. Then we need to paint it and do the roof.
Wednesday, July 8, 2020
Tool Shed
It's been a while since we posted anything on the tool shed, so here is where we're at. The inside has the work bench setup, pegboard hung and all the tools are put away. There is a freestanding cupboard in the corner for materials and the electrical is all done. The trim on the outside is all hung, spot primed and speckled. We'll paint it next and then we can start on the siding.
Saturday, July 4, 2020
Ceiling Fans
It's been a wet June and the weather each of the last couple weekends has not been good. We finally made it up to the cabin and got some time to work on it. It looks like it will be a while before we get the ceiling finished, so we decided to go ahead and hang the ceiling fans now. The hope is this will help keep things cooler inside when it starts getting hot.Saturday, June 6, 2020
Tool Shed
After a really long week at work, I decided to take a few hours for myself today. I went up to the lake and got the new door in the shed. I had to reframe the opening because they didn't have a 30x80 door in stock, so I got a 32x80 instead. I also got the cabinet run installed, the workbench top down and the junction boxes installed. It's almost ready for use!
Sunday, May 31, 2020
Tool Shed
I was able to get the rafters cut and installed and get the sheathing on the roof before heading home for the week. It's not water tight, but it will do for now. Next weekend we'll get the roof on and get the cabinets and counter top on so I can start moving tools in! It won't be long and the girls can start sleeping in their bedroom again.
Saturday, May 30, 2020
Tool Shed
The walls are up and the top caps are installed. The sheathing is only rough cut around the door at this point so we can get in and out of the shed. I'll dig out the router and trim it up when I get the door next week. It would be nice to get the roof on, but we have a hefty storm coming, so we had to clean up before dinner and we won't be able to work on it after we eat.
Tool Shed
The trenches have been dug and filled with gravel. The pressure treated 4x4s have been laid down and the floor frame has been built and everything is level. The power line has been run up through the floor and we are ready for the walls to go up. They have been pre-fabed at home, so we should get them up before the storm his this evening.
Retaining Wall
It took several more hours and countless 5 gallon buckets full of dirt, but I finally got the area above the retaining wall back filled and leveled off. The screwdrivers in the dirt mark the location of the tool shed that will be started this afternoon. We still have some work to do on the lower wall and 1 more wall to build up hill from this one.
Thursday, May 28, 2020
Tree Removal
When we bought the cabin, there was a tree on the beach that was leaning way out over the water. Over the last couple years it has gotten worse, to a point where it is starting to lift the retaining wall. So we finally decided to have it taken down. Turns out it had carpenter ants, so it would have died even if we didn't take it down. When the water level goes down rather, I'll cut the stump off lower.
Subscribe to:
Posts (Atom)


